Dye migration is a Haring Centipede Astro678 T-Shirt . Common issue screen printers face but with high quality apparel like Kingtees, the likelihood is significantly less. We break down a few tips on how to combat this issue before, during and after the apparel hits the press.
Haring Centipede Astro678 T-Shirt, hoodie, sweater, longsleeve and ladies t-shirt
Dye migration is where a garment has heated up too much during the curing process Haring Centipede Astro678 T-Shirt . It’s allowed the ink to become a gaseous state and some of the dye will seep through the ink, changing the pigmentation. If you printed white ink on a red t-shirt, you would spot dye migration by the way the white ink turned pink from the red dye from the shirt that has risen through the ink. The quality of blank apparel is essential to what happens with the dye migration process. We see this more on synthetic fibers. If there are inconsistencies within batches of blank apparel from one batch to the next, you can see even more migration happening. This type on inconsistency is not common when printing on kingtees due to our centralized and consistent dyeing process. At kingteeshops, we minimize the chance of dye migration by standardizing the high quality dyes we use and the machines used in the dyeing process. If dye migration does occur, there are certain troubleshooting methods you can try during the print process to help identify the cause. The consistency of kingteeshops apparel assures printers that 6 months, two years or even longer down the line prints will be the same every time. Controlling palette temperatures and understanding your flash times on press is very critical. During the production process, make sure the press isn’t getting too hot and you’re maintaining a consistent temperature throughout the run. Consistent temperature helps maintain the same look with your inks.
You want to understand your inks and how they pair with the garment you plan to print on. A low bleed or polyester ink is typically common on synthetic fibers, which tend to bleed, so these inks help mitigate that risk. Depending on what ink you’re going to use, traditional plastisol, water based, or a low cure low bleed ink, each one has a different flash temperature and curing temperature. Temperatures for this could range from 260 to 300 degrees. Maintain this temperature to not get too high on the synthetic fibers. As it gets hot, the dye of the fabric will have a chance to migrate.
The dryer needs correct profiling. You can have hot spots or cold spots within a dryer. A doughnut probe will help your dryer maintain consistent heat throughout its run. Double check your ink is not overcooked as well. It needs to be cured to the exact temperature in order to not cause dye migration.
When the apparel is coming off the dryer, offset your stacking. People often stack freshly dried apparel into a printers dozen directly into a box where the heat is retaining. So after the box has shipped and arrived to the customer, dye migration has occurred. The apparel might have started out with perfect white ink but because of the compressed heat in the shipped box and the shirts stacked one on top of the other, it changed the outcome of the apparel entirely.
You Can See More Product: https://nicetshirtstore.com/product-category/trending/
4 reviews for Haring Centipede Astro678 T-Shirt
Add a review
Related products
Sale!
Sale!
Sale!
Sale!
Sale!
clothing
Sale!
Sale!
Geoffrey Breault –
tamaño perfecto, muy llamativa esta camisa, me gusta mucho
Cole Ashbaugh –
Love it! Simple,nice and fits the body well enough. A nice shirt.
Nick Heinz –
So, I’ve been dropping some poundage and needed an athletic shirt to sit as a stand in for a cycling jersey. I didn’t want to spend money on a cycling jersey, only to not be able to wear it in a few months. This shirt was a great decision. I’ve never worn athletic shirts before, so I wasn’t sure what to expect or how effective it would be.
First, the shirt is incredibly comfortable. On a 2.5 hour ride, it never chaffed or rubbed the wrong way. I purchased it in white, so it did a great job at reflecting the sunlight and keeping me cool. I was also pretty impressed at how quickly the shirt dried (and I sweat A LOT). Within about 20 minutes of me finishing my ride, the shirt was pretty dry.
But overall, really worth the money.
Anonymous –
conforme au descriptif